Stand-type, two band, bassreflex reproduction system, volume 10 litres, is made of combination of natural wood and MDF. The front wall of the baffle is made of pure wood min. 65 mm thick, the other walls are made of MDF, covered with a veneer made of natural wood. All the edges of the front wall of the baffle are smoothly rounded. The interior of the baffle consists of five open chambers, made of MDF (system CSWA) 25 mm thick. Three mm thick bitumen plates, combined with textile fabric are glued to all the free walls of the baffle. This construction efficiently suppresses the stationary wave motion and prevents transfer of vibrances on to the baffle. A new damping material, Twaron® - Angel Hair, was used. It is freely distributed in all the chambers. To connect to the amplifier, golden terminals for bi-wiring, alternativelly bi-amping connection are used. 

The filtration part contains good – class passive components from the company Mundorf® or AUDYN or TRITEC (depending on the requirements of the customer). Design of the crossover, its fabrication and measuring was made in the company Adam Vox (Software LspCAD 6 Pro –Ingemar Johansson, IJData, Sweden).

Power handling (IEC)
Nominal impedancy
8Ω (min. 6Ω / 170Hz – 220Hz)
87dB – 1W/1m
Frequency range
50Hz – 20 kHz (+0/- 3 dB )
Used drivers
Tweeter: 1,1" Morel ET 338-104 – 1 piece
Middbass: 6" Morel ECW 638 – 1 piece
Recommended amplifier power
50W – 200W
Dimensions (H x W x D)
395 x 230 x 400mm
20kg (44lb) / piece