The floor-standing, two-way, bass-reflex loudspeaker system with a volume of 15 litres is made of a combination of natural wood and MDF. The front wall of the enclosure is made of pure wood with a thickness of at least 48mm and at most 85mm. The other walls are made of MDF boards, veneered with natural veneer. All edges of the front wall of the baffleboard are thoroughly rounded. The inside of the enclosure consists of nine open chambers made of MDF material (CSWA system) with a thickness of 25 mm. For impeccable strengthening of the baffle, three-millimetre-thick bitumen sheets combined with fabric are glued in almost all places. This construction achieved effective suppression of standing waves and prevention of transmission of resonances to the baffleboard. For damping, a damping material, Twaron® - Angel Hair, is used, freely distributed in all chambers. High-quality, gold-plated terminals for connecting bi-wiring or bi-amping are used to connect to the amplifier.
The filter part contains high-quality passive components from Mundorf® or othermanufacturers (according to customer requirements).
_x13s5.jpg){kind=link}
Oak, maple, walnut wood... and natural veneer according to the type of wood used on the front baffle are used for surface treatment. The choice of material for surface treatment is also possible according to the special requirements of the customer.
|
Power consumption (IEC)
|
150W
|
|
Nominal impedance
|
4Ω (min. 3,8Ω / 190Hz – 200Hz)
|
|
Sensitivy
|
88dB – 1W/1m
|
| Frequency range
|
50Hz – 32 kHz (+0/- 3 dB )
|
| Speakers used
|
Treble: AMT Mundorf – 1 piece
Midrange: 6" Morel – 1 piece
|
|
Recommended amplifier power
|
50W – 200W
|
|
Dimensions (height x width x depth)
|
890 x 230 x 360mm
|
|
Weight
|
31 kg/piece
|