The floor-standing, three-way, bass-reflex loudspeaker system with a volume of 92 litres (bass-reflex chamber) and 7 litres (midrange closed chamber) is made of a combination of natural wood and MDF. The front wall of the enclosure is made of pure wood with a thickness of at least 55 mm and at most 110 mm. The other walls are made of MDF boards, veneered with natural veneer. All edges of the front wall of the baffleboard are thoroughly rounded. The interior of the bass reflex enclosure consists of twelve open chambers made of MDF material (CSWA system) with a thickness of 25 mm. For impeccable strengthening of the baffle, three-millimetre-thick bitumen sheets combined with a 10mm thick non-woven fabric are glued to the exposed areas. This construction achieved effective suppression of standing waves and prevention of transmission of resonances to the baffleboard. For damping, a damping material, Twaron® - Angel Hair, is used, freely distributed in all chambers. High-quality, gold plated terminals for connecting bi-wiring or bi-amping are used to connect to the amplifier.
The filtration part contains high-quality passive components from Mundorf® or other manufacturers (according to customer requirements).
Oak, maple, walnut wood... and natural veneer according to the type of wood used on the front baffle are used for surface treatment. The choice of material for surface treatment is also possible according to the special requirements of the customer.
|
Power handling (IEC)
|
300W
|
|
Nominal impedancy
|
6Ω (min. 4,9Ω / 340Hz – 450Hz
|
|
Sensitivy
|
87dB – 1W/1m
|
|
Frequency range
|
21Hz – 20 kHz (+0/- 3 dB )
|
|
Used drivers
|
Tweeter: 1,1" Morel – 1 piece
Middbass: 6" Morel – 1 piece Bass: 12" Morel – 1 piece |
|
Recommended amplifier power
|
50W – 500W
|
|
Dimensions (H x W x D)
|
1100 x 380 x 570mm
|
|
Weight
|
88 kg/piece
|